Our Products
Laserchaser 180
Blades not included
€750+ VAT
Laserchaser 180 is a heavy-duty wall chaser built for professionals- cutting through blocks and reinforced concrete with speed, precision, and minimal dust. Designed for the Hikoki G23SC3 motor, its lightweight die-cast aluminium housing ensures durability and reduced operator fatigue.
2400W / 110V
Laserchaser 180
+ Set (2) D180 Premium Black Blades
€850+ VAT
Laserchaser 180 + 2 D180 Premium Black Blades will cut approximately 1500 meters at 25mm depth in 10N to 20N load-bearing blocks used in apartments or commercial units.
(NB: The D180 Black will also cut 5N block work, but the blade life will be reduced, although the cutting speed will be faster.)
Application: Medium-Hard Block
Bore: 180mm x 22.23mm
Laserchaser 180
+ Set (2) D180 Premium Bronze Blades
€850+ VAT
Laserchaser 180 + 2 D180 Premium Bronze Blades have been developed to cut hard blocks, natural stone and 50-60N mass concrete. This blade will give high performance, 800+ meters in hard materials. It will cut fast in so after block work but will wear quickly.
(NB: Do not use D180 Bronze in 5-10N block as cutting life will be very short.)
Application: Hard block/concrete
Bore: 180mm x 22.23mm
Set D180 Premium Bronze Blades
€150+ VAT
D180 Bronze Blades have been developed to cut hard blocks, natural stone and 50-60N mass concrete. This blade will give high performance, 800+ meters in hard materials. It will cut fast in so after block work but will wear quickly.
(NB: Do not use D180 Bronze in 5-10N block as cutting life will be very short.)
Application: Hard block/concrete
Bore: 180mm x 22.23mm
Set D180 Premium Black Blades
€150+ VAT
D180 Premium Black Blades will cut approximately 1500 meters at 25mm depth in 10N to 20N load-bearing blocks used in apartments or commercial units.
(NB: The D180 Black will also cut 5N block work, but the blade life will be reduced, although the cutting speed will be faster.)
Application: Medium-Hard Block
Bore: 180mm x 22.23mm
Set (2) D180 Economy White Blades
€75+ VAT
D180 Economy White Blades will cut approximately 500 meters at 25mm depth in standard 5N block, which is used in the majority of private houses. 5N can also be found in commercial, industrial or apartment sites where load-bearing blocks are not required.
(NB: The D180 White will not cut blocks that are stronger than 20N.)
Application: Medium Block
Bore: 180mm x 22.23
